Nezone Tubes :::Furniture Tubes

Furniture Tubes Confirming to IS 7138/1973

Standard Size

Outside Diameter	Wall Thickness
mm	mm
12.70	1.0, 1.2, 1.6, 2.0
13.50	1.0,1.2
16.00	1.0,1.2
17.20	1.0,1.2,1.6
19.00	1.0,1.2,1.6
20.00	1.0,1.2,1.6
21.30	1.0,1.2,1.6
22.00	1.0,1.2,1.6,2.0
25.40	1.0,1.2,1.6,2.0
26.90	1.0,1.2,1.6,2.0
28.50	1.0,1.2,1.6,2.0
30.00	1.0,1.2,1.6,2.0
31.80	1.0,1.2,1.6,2.0
33.70	1.0,1.2,1.6,2.0
38.00	1.0,1.2,1.6,2.0
42.40	1.0,1.2,1.6,2.0
44.50	1.0,1.2,1.6,2.0
48.30	1.0,1.2,1.6,2.0
51.00	1.0,1.2,1.6,2.0

Tubes in thickness other than those given in above table may be supplied in thickness 0.45mm to 2.00mm.

Tolerances

a) Outside Diameter Maximum Deviation
Upto & including 21.3mm #9;
Above 21.3mm

± 0.2mm
± 0.3mm

b) Wall Thickness (for all sizes)
+ not limited
- 8%

c) Weight

i) For single tube and for quantities

ii) Less than 150m of one size

iii) For quantities of 150m and over of one size
+10%

-8%

± 4 %

d) Lengths

i) Random Length
4 to 7 Mtr.

ii) Exact Length upto 3m long + 6mm
- 0mm

iii) Over 3m long + 10mm
- 0mm

TOP

	Home Vision QualityProducts Process CustomerSpeakSitemapContact

	H.R. Pipes: Black Pipes - Structural \| Black Pipes - Others \| Galvanized Pipes \| Idlers Tubes \| General Engineering Tubes
	Lancing Pipes \| Hollow Section Tubes (RHS / SHS) \| Air Heater Tubes \| Water Well Tubes

	C. R. Tubes: Furniture Tubes \| Bicycle Tubes \| Automotive Tubes \| Transformer Tubes \| Hollow Section Tubes (RHS / SHS)
	Boiler Tubes \| General Engineering Tubes \| Electrical Conduit

	C. R. C. A. Strips: Cold Rolled Steel Sheets & Strips \| Galvanized Steel Strips

	Swadged Poles (Electrical): Swadged Poles Scaffolding: Scaffolding