Nezone Tubes :::Galvanized C R Steel Strips for Armouring of Cables

Galvanized C R Steel Strips for Armouring of Cables confirming to IS 3975/1999

Thickness:
The thickness of tapes shall be 0.5mm, 0.8mm, 1.0mm 0r 1.25mm with a tolerance of ± 5 %.

Width:
The tapes may be supplied in the widths of 25mm, 32mm, 35mm, 40mm, 50mm, 70mm & 80mm. The tolerance of width will be ± 2 %.

Mechanical Properties

Tensile Strength : 300 –450 MPA

Elongation : 10 % Min

Galvanizing Requirements
Mass of Zinc Coating is 210 grams per Square metre.

Uniformity of coating is ensured by testing scientifically drawn samples by dip method.
The samples are tested for three dips of 1 minute each in copper sulphate solution.
Adhesion of Zinc is ensured by testing samples by turning the strips on mandrel.

Galvanised Cold Rolled Strips for formed sections & Rolling Shutter lathes:-
C R galvanised strips from 20mm to 150mm width & from 0.45mm to 2mm thickness can be supplied as per customers requirement for forming sections for structural & other purposes including for forming lathes for rolling shutters.

TOP

	Home Vision QualityProducts Process CustomerSpeakSitemapContact

	H.R. Pipes: Black Pipes - Structural \| Black Pipes - Others \| Galvanized Pipes \| Idlers Tubes \| General Engineering Tubes
	Lancing Pipes \| Hollow Section Tubes (RHS / SHS) \| Air Heater Tubes \| Water Well Tubes

	C. R. Tubes: Furniture Tubes \| Bicycle Tubes \| Automotive Tubes \| Transformer Tubes \| Hollow Section Tubes (RHS / SHS)
	Boiler Tubes \| General Engineering Tubes \| Electrical Conduit

	C. R. C. A. Strips: Cold Rolled Steel Sheets & Strips \| Galvanized Steel Strips

	Swadged Poles (Electrical): Swadged Poles Scaffolding: Scaffolding